山东净之源净化工程有限公司山东净之源净化工程有限公司

  • 地址:济南市槐荫区鑫苑世家公馆2号楼2603室
  • 电话:0531-87568508 /
  • 手机:18653128690
  • 邮箱:jnyhrs@163.com
  • 洁净无尘车间工程不合格怎么办?
    来源:http://www.hnsfk.com 浏览: 发布日期:2018-05-18
    洁净无尘车间是一种非常干净的车间环境,空气净化工程在里面所有的工作人员包括所有的机械设备都要达到一定程度的标准,干净整洁,才能保证生产产品的质量要求,只有无尘车间才能保证芯片所有的质量和功能。
    Clean and dust-free workshop is a very clean workshop environment. All the workers in the air purification project, including all the machinery and equipment, have to meet a certain degree of standards, clean and tidy, to ensure the quality requirements of the production products. Only the dust free workshop can guarantee the quality and function of the chip.
    洁净无尘车间工程不合格的原因是什么?
    What is the reason for the unqualified work in clean and dust-free workshop?
    1.工程设计不合理
    1. the design of the project is unreasonable
    这种现象比较少见,主要是在一些小型的净化级别要求不太高的洁净室建造上。现在净化的竞争比较激烈,一些施工单位为了得到工程,在投标中给出了较低的报价。
    This phenomenon is relatively rare, mainly in the construction of some small clean rooms that require less cleanliness. Now the competition for purification is fierce. Some construction units have offered lower quotations for bidding in order to get the project.
    2.用低档产品替代高档产品
    2. replacing high-grade products with low-grade products
    空气净化工程在洁净室高效过滤器的应用上,国家规定在洁净度10万级或高于10万级以上的空气净化处理,应采用初效、中效、高效过滤器的三级过滤。
    In the application of the clean room high efficiency filter, the state stipulates that the air purification treatment of 100 thousand levels of cleanliness or above 100 thousand levels should adopt the three stage filter of the first effect, the medium effect and the high efficiency filter.
    3.送风管或过滤器密封不好
    3. air supply pipe or filter is not well sealed
    这种现象是施工粗糙造成的,在验收时会表现出在同一系统中某个房间或局部不合格,改进的方法是,送风管采用漏光试验法检漏,过滤器用粒子计数器对过滤器的断面、封胶、安装框架进行扫描,找出泄露位置,精心密封。
    This phenomenon is caused by the rough construction, in the acceptance of the same system will show a room or part of the same system is not qualified. The improvement method is that the air duct is leaked by leakage test. The filter uses particle counter to scan the section, sealing and installation frame of the filter to find out the leakage position and carefully seal it.
    我们一直以质量,顾客至上,作为我们的服务宗旨,尽我们大的努力来为您提供满意的服务,我们真诚的欢迎您来本公司视察,选购,希望我们有良好的合作机会,共同创造双赢的局面!
    We have always been with the quality first, customer first, as our service tenet, our best efforts to provide you with satisfactory service, we sincerely welcome you to this company inspection, selection, hope that we have a good opportunity to cooperate to create a win-win situation together!
    深圳市米朗科技有限公司 长沙维尔康湘鹰离心机有限公司 淄博鸿方机械制造厂 华纺股份有限公司 永凡棋牌APP下载 幸运飞艇技巧图片漏洞 高新技术企业--虹识技术 济南万测电气设备有限公司 镇江市神龙电器管件有限公司 江苏11选5走势图